Description:

 

VIDENT iEasy310 Pro is an ultra portable OBD2 scanner which can quickly read and erase DTC (engine fault codes). It is a perfect tool for entry-level mechanic enthusiast and DIYers. VIDENT iEasy310 Pro can also be used for plus oxygen monitor test, on-board monitor test, and component test, etc. Its thousands of built-in troubleshooter code tips can help technicians save much time. All in all, iEasy310 Pro is truly the ultimate in cost-effectiveness.

 

Supported Languages:

 

English, French, German, Spanish, Portuguese, Italian, Russian, Hungarian, Sweden, Czech, Slovak

 

Functions:

 

1. Supports all OBD-II functions, turns off check engine light, reset monitor, read enhanced data etc.

2. Give the full name interpretation of data without the difficulty in understanding abbreviations.

3. User-friendly design, one-click read/ clear fault，I/M and read/clear trouble code hot buttons and 2.8 inch TFT color screen.  

4. Emission test helper, green-yellow-red LEDs and built-in speaker indicate emission monitor status.

5. No battery required, it is charged directly from OBD-II interface in your vehicle(You just need to turn on the car ignition).

6. Supports lifetime free upgrade online via USB cable. Highly recommended as a necessity in your toolbox.

 

Highlights:

 

1. Works with all 12V standard OBD-II protocols vehicles.

2. Automatic VIN acquisition and decoding make it easier to read manufacturer specific codes and enhanced mode 6 data. 

3. Supports data storage, fault code, system information and other important data storage, playback function. You can also connect your iEasy310 scanner to printer and print out the scan data.

4. Supports waveform display and support maximum 4-channel waveform comparison. 

5. Supports 12v standard vehicles battery voltage test.(See if the battery can be used to start a car)

6. Maintenance technicians can select 4 data streams for comparison based on the phenomenon and analyze vehicle problems

7. Data waveform display and comparison of 4 data waveforms for easy observation of digital changes.

8. You can customize boot logo.

9. Supports all the 10 OBD-II test modes:

Read Codes

Component Test

Live Data

Unit of Measure

I/M Readiness 

Erase Codes

On-Board Monitor Test

View Freeze Frame 

Vehicle Information

Modules Present

 

Supported Cars:

 

USA(compatible with 12V standard OBD2 cars from 2001 to now)

Chrysler, Ford, GM, Jeep, GMC, BUICK, Saturn, Pontaic, Chery

 

Europe(compatible with 12V standard OBD2 Cars from 2004 to now)

Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, Fiat, VW, Ford, Jaguar

 

France(compatible with 12V standard OBD2 cars from 2006 to now)

Peugeot, Citroen,

(not support Renault Clio 2 / Megane / Dacia Logan...)

 

Japan(compatible with 12V standard OBD2 cars from 2007 to now)

KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota

 

China(compatible with 12V standard OBD2 cars from 2011 to now)

BYD, Chery, Geely, Great Wall, Karry, JAC

 

Note:

 

Even though it is compatible with most cars, it may not be compatible with some cars due to its special design or somethings else. Vehicles in different regions support OBD2 protocol at different time. VIDENT iEasy310 Pro is not compatible with those vehicle that do not support OBD2 protocol, such as some Japanese and Korean vehicles.

 

Warning:

 

Not support Russian cars VAZ, UAZ, LADA; Not works with trucks

Not support for All Renault vehicles 

For Ssangyong Actyon , from 2009 to 2017 years.

For Ssangyong Korando, 2.0 TD Diesel, from 2013 to 2017 years.

For Ssangyong Kyron, 2.0 Diesel, from 2010 to 2017 years.

For Ssangyong Rexton , 2011 to 2017 years, 

 

Packing List:

 

Vident iEasy310Pro Code Scanner with OBD2 Cable

USB Cable

User Manual

Packing Box