|
Name: VXSCAN Brake Fluid Tester with 5 LEDs
Description:
VXSCAN Brake Fluid Tester with 5 LEDs for 5 levels test results.
Press power button to power on, green LED will light up.
Insert VXSCAN Brake Fluid Tester into reservoir for a second, then the results will be indicated correctly by LEDs.
It supports auto power off.
LED Indicators:
Green: Battery OK (i.e.: No Water Contained in the Brake Fluid)
Yellow: Less than 1% of Water Content in Brake Fluid
Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid
Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid. The Brake Fluid Should be Changed.
Yellow/Yellow/Red/Red: At least 4% of Water Content in Brake Fluid. The Brake Fluid Must Be Changed Urgently! Extreme Danger!
Notice:
1. Please replace battery if the Green LED does not light up after you press power button.
2. Wash the test probe with tap water after use.
3. If you skin or clothing contacted with fluid, please use the water to wash.
4. Do not expose brake fluid to atmosphere for a long time as fluid is highly hygrosopic!
|
USD
.jpg)
