Name: XProg-Box v5.50
Description:
The XPROG Box v5.50 project is a continuation of the project XPROG and now supports more than 450 units (serial EEPROMs, Microcontrollers (MCU), Electronics Control Units (ECU), Dashboards, Immobilizers, Calculators and others).
XProg M Programmer v5.50 can use only our software CD, the hardware will be damaged without any warranty and can not be repaired if you use other version software(lower or higher) or try to update the software or hardware.
Important Attention:
Close off the antivirus program on your computer. If not, it will damage software
Turn Off the Internet. If not, it will damage the hardware, and this kind of damage has no warranty!
Delete all the previous XProg-M softwares, make sure that your computer is only installed our software V5.50. Our XProg-Box hardware can not work on any other XProg-M software. Otherwise, the hardware will be burned or damaged. And this kind of damage has no warranty!
Never try to update! Otherwise, the hardware will be burned or damaged . And this kind of damage has no warranty!
We will not refund or exchange or repair it if you do not listen to above advice.
Software Supported Language: English only
Computer Configuration Requirements:
Processor: Intel Pentium 60MHz or faster (depends on operating system)
Memory(RAM): 64MB (depends on operating system)
Hard Drive: 20MB free space
Communication: one free physical COM or USB port
Operating System: Microsoft Windows NT/ME/2000/XP/Vista/Windows 7
Set Includes:
XProg-Box
Basic software authorizations and programming adapters
USB cable
Software CD
AUTHORIZATIONS:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATmega family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, chassis number (VIN), serial number and PIN code).
AUTH-0022
ADAPTERS:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Rev.C+
|