|
|
|
|
Name: VCM II for Land Rover
Description:
The VCM 2 for Land Rover connects directly to the vehicle OBD-II (diagnostic) connector and then connects to a laptop via a USB cable for use with SDD. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR SDD diagnostic tool.
VCM II for JLR is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications. Only SCP communications are not possible with this device.
Features:
JLR approved device
Replacement for JLR SDD VCM
Covers CAN, & ISO9141 vehicle networks
Most cost effective Land Rover pass-thru VCI device
Best suited for current and future vehicles
12 feet USB cable as standard included
Easy to update for J2534 new functionality
How does the VCM2 for Land Rover operate in J2534 mode?
1. Please read the user manual firstly before using, install the software after watching the video or user manual in the DVD.
2. Connect the J2534 device to the vehicle OBD-II connector (the device gets power supply from the vehicle).
3. Connect the 12 feet USB cable to the J2534 device and the other end to the laptop with SDD.
4. The red vehicle power supply (PWR) LED will illuminate to show that the device is powered up.
5. During communication with the vehicle the status (STS) LED will flash in green.
6. The device interacts with the SDD diagnostic tool in the same way as the existing VCM.
|
|
|
|
You May Also Need
|
|
|
|
|
|
|
|
Write Reviews
|
|
|
|
Notice:
1. Please write reviews related to only current page product.
2. All reviews must be in proper words and contains no any illegal
content.
3. Inproper reviews will not be displayed! Correct reviews will be viewed
or replied within 1-2 working days!
|
|
|
|
|