|
Name: Launch Creader Elite
Description:
Launch X431 Creader Elite is the best choice for car owner with OE-level full function diagnosis and lifetime free update.
Buy Launch X431 Creader Elite, enjoy Launch X431 V function!
Supported Languages: English, French, German, Spanish, Portuguese, Italian, Russian, Japanese, Korean, Traditional Chinese
Software Update: free update online for lifetime
Features:
1. OE-Level Professional Car Full System Diagnosis
2. Full Bi-Directional Control (Active Test) + ECU Coding
3. Support 31+ Reset Service (keep increasing)
4. Guide Functions for VW / Audi
5. Support Auto VIN Scan + Remote Diagnosis + Diagnostic Feedback
Functions:
1. OE-Level Full System Diagnosis
Launch X431 Elite can establish a data link to all systems and subsystems of the vehicle.
1). Read all DTC types for full system, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.
2). Displays live data in text, graph for easy data review and analysis, record and playbacks live data to pinpoint troubles of sensors and components.
3). The following is a list of modern vehicle systems that Launch X431 Elite can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension Systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.
2. ECU Coding
It allows you to recode adaptive data for certain components after making repairs or replacements, and make the ECU recognize the replaced part. Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like parking assistant, A/C, and activating the auto side mirrors folding function.
3. Bi-Directional Control(Active Test)
The scanner allows you to activate or control a vehicle system or component, it can send commands to the ECU, read ECU data to determine the integrity of the system or component, and monitor the operation of the components, letting you quickly understand whether a specific system, component or subsystem is operating normally,such as turn on the radiator fan, open/close windows, operate mirrors, etc.
4. 31+ Reset Service(keep updating)
1). Steering Angle Reset
Reset the steering angle to zero to keep the car running straight.
2). Injector Coding
Write the new injector code into the car system for the correct cylinder injection quantity.
3). IMMO
Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.
4). DPF Regeneration
Especially works for DPF system with D-P-F regeneration, D-P-F component replacement teach-in and DPF teach-in after replacing the engine control unit.
5). A/C Relearn
The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.
6). ABS Bleeding
Help exhaust the air after repair the ABS pump system.
7). AdBlue Reset
Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
8). Throttle Matching
Initialize the throttle actuators to the default state.
9). TPMS Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
10). Tire Reset
Set the size parameters of the modified or replaced tire.
11). AFS Headlamp Reset
Initialize the adaptive headlamp system.
12). Sunroof Initialization
Initialize the sunroof when locked off or closed.
13). Battery Reset
Register the battery after replacement.
14). Seat Calibration
Calibrate the memory in replaced or repaired seats.
15). Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
16). A/F Reset:
Set or learn Air/Fuel ratio parameters.
17). Gearbox Learn
18). Transport Mode
19). Windows Calibration
20). Language Change
21). Suspension Reset
22). NOx Sensor Reset
23). Stop/Start Reset
24). Coolant Bleeding
25). Brake Reset
and more ...
It is important in the maintenance of electronic braking system's safety and efficiency.
(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)
5. Full OBD2 Functions
1). Read Codes:
Show the detailed description of the Diagnostic Trouble Code (DTCs).
2). Clear Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitor.
3). Data Stream:
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4). I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5). Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6).View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7). O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8). Onboard Monitor Test:
Retrieves and displays test results for emission-related Powertrain components and systems.
9). Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10). Component Test:
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
6. 4-in-1 Live Data
This function retrieves and displays live data and parameters from the vehicle's ECU. A pull-down list of the data stream items will appears on the screen. Select the necessary items (Max. 4 items can be selected at the same time) and the screen will display the waveforms corresponding to these items immediately.
7. Fast Auto VIN Scan
Launch X-431 Creader Elite Adopts Auto-VIN technology that will automatically recognize vehicle information which you get the vehicle make, model and year information more easily and then it will automatically generate a full system Health Report which you can quickly access all the electronic control units of vehicle and generate a detailed report about vehicle health.
8. DTC Lookup
Accurately identify car problems, avoiding blind maintenance. DTC Lookup is used to search for definitions of DTCs stored in the DTC library and for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.
9. Share and Print Diagnostic Report
All Module Diagnosis automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.
Specifications:
Display: 4 inch touch screen with 480*800 pixels resolution
CPU: 4-core 1.3GHz processor
RAM: 1GB
ROM: 16GB
WiFi: 802.11b/g/n 2.4GHz
Port: USB Type-C
OBD-II Input Voltage Range: 9V to18V
Power: DC 5V data cable or diagnostic cable through connection to vehicle DLC
Working Temperature: -10 to 45 degree centigrade
Storage Temperature: -20 to 70 degree centigrade
Packing List:
Launch X431 Creader Elite
USB Cable
Multi-Languages User Manual
Multi-Languages Quick Start Guide
Packing Box
|
USD
.jpg)
