Description:

 

GODIAG Jaguar Land Rover Pre-2017 JLR and Post-2017 KVM RFA 2-in-1 Communication Test Cable.

 

For JLR vehicles model before 2017, key matching requires soldering wires to read and write to the KVM RFA module. For vehicles after 2017, key matching requires replacing the KVM RFA module's MCU. Careless operation during these two steps can easily cause the module to lose communication, so a communication test of the KVM RFA module is required before installation.

 

The cable has two ends, one end for pre-2017 JLR KVM modules and the other end for 2018 - 2025 KVM modules. If you have done something to the KVM module, connect the KVM module with diagnostic tool to test the KVM communication status.

 

Note: 

 

This cable can not be used to read and write KVM module for key programming purposes.

 

Function:

 

The Jaguar Land Rover KVM RFA 2-In-1 Communication Test Cable is used to enable communication between diagnostic equipment and the KVM RFA module.

 

Application Scenarios:

 

1. Used in the office during key matching or for standalone communication after the module is removed from a vehicle.

 

2. Can be used to test a standalone KVM RFA module during vehicle repair.

 

3. Can be used for connection testing during KVM RFA module repair.