Name: CG FC200 DAP Adapter for Delphi Toyota Denso

 

Description:

 

CGDI FC200 DAP Adapter works with CG FC200 programmer to Read Delphi 7.1AP, Delphi TC277TP, Toyota Denso 76F0038GD, 76F0070, 76F0085, 76F0039GD, 76F0040GD etc., ECUs.

 

CGDI FC200 DAP Adapter is mainly for Toyota's first-generation Denso series, Delphi's DCM7.1AP & DCM7.24 chips.

 

Features:

 

1. Wide Compatibility with Mainstream Chips: 

CGDI FC200 DAP Adapter primarily supports reading/writing and verification operations for key chips such as Toyota's first-generation Denso series, as well as Delphi's DCM7.1AP and DCM7.24. Optimized communication protocols and stable hardware interfaces ensure more efficient and secure ECU data reading and flashing.

 

2. Online Firmware Updates: 

Simply connect to the internet to obtain and install the latest official firmware with one click.

 

3. Continuously Expanding Chip Support: 

The FC200-DAP is developed based on a scalable hardware platform and software architecture. We will continuously expand its supported chip models through ongoing firmware updates.

 

Functions:

 

1. DAP Function: Primarily for reading and writing ECUs with TC2xx (Infineon) chips, only supports boot (opening cover) mode.

 

Main Models:

 

DCM7.1AP - China cars, Hyundai, Kia, and Indian market models (Tata, Mahindra, Isuzu, etc.), can read Dflash, Pflash, modify VIN, includes a built-in verification program; ECU cloning requires customer verification upon installation.

 

DCM7.24 - China Yuchai

 

Note: Adding ECUs for other models or ECUs with chips like TC297 is possible, but it is best to have the customer provide the ECU.

 

Precautions: 

 

1). The correct vehicle model must be selected for operation; 

2). Diesel engines require a stable 12V power supply.

 

2. Toyota/Lexus ECU (first generation, early 2000s) NEC76F00xx chip boot mode read/write, supports the following 8 chip types:

 

76F0038GD

76F0038AGD

76F0039GD

76F0039AGD

76F0040GD

76F0040AGD

76F0070

76F0085

 

Important Note:

 

Since Denso ECU housings come in many different versions, you must verify the chip model when using this function. If the chip is among the eight chips supported by the device, you can use the DAP adapter without needing to check the ECU cover model; only check if the chip matches. The model number on the FC200 menu corresponds to the silkscreened model number on the PCB board after opening the ECU cover. Select the corresponding wiring diagram from the menu based on this silkscreened model number.

 

Specifications:

 

Operating Voltage: 12V

Operating Current: 1A

Operating Temperature: -20℃to 85℃

Storage Temperature: -40℃to 80℃

Operating Humidity: 30%RH to 60%RH

 

Packing List:

 

CGDI FC200 DAP Adapter

FC200-DAP Cable 

76F Adapter Board

Pin Header (5 pcs)

Gray Ribbon Cable Connector

DB15 2-Row Male-Female Connector

DIDC Ribbon Cable Extension Cable6F0039GD, 76F0040GD, etc. ECUs.