|
Name: Launch CRP919X BT Supports CAN FD / DoIP / 31+ Reset Services
Description:
Newest Launch scan tool CRP919X BT comes with Android10.0 OS & 2GB+64GB memory is upgrade version of Launch CRP919X and it runs much faster.
Launch CRP919X BT can connect to car via Bluetooth with new added Launch DBScar VII VCI.
Software Update: 2 years free update online
Supported Languages:
English, French, German, Spanish, Portuguese, Italian, Russian, Arabic, Turkish, Dutch, Greek, Polish, Hungarian, Danish, Persian, Serbian, Finnish, Swedish, Czech, Japanese, Korean, Chinese Simplified, Chinese Traditional
2 Versions:
EU/UK Version: for EU/UK market
Global Version: for global market except EU/UK
Highlights:
1. Connect car via Bluetooth with DBScar VII VCI.
2. Support CAN FD and DoIP new protocols car.
3. Added Guide Function of Audi / BMW.
4. More Powerful Configuration: 7 inch touch screen + Android 10.0 operating system, 4GB RAM + 64GB ROM large storage and equipped with a 6300mAh high endurance battery, making diagnosis faster, more stable, and more durable
5. OE-Level Full System Diagnose
6. ECU Coding + Active Test (Bi-Direction Control)
7. 31+ Reset Service
8. Auto VIN Scan
9. Extend to work with FCA account (optional)
Functions:
1. OE- Level Full System Diagnosis
As an OE level automotive diagnostic tool, Launch CRP919E can access most car ECUs to Read/Clear Codes, Retrieve Live Data, Freeze Frame, ECU Information and perform Active Tests, Matching, Adaptation, Turn Off Warning Lights, Reset Monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Supported Systems:
ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System...
1). For Engine System:
Help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
2). For Transmission:
It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
3). For ABS System:
Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.
4). For SRS System:
SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status.
5). For Brake System:
If you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
6). For Emission System:
If the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
7). For Fuel System:
If vehicle will not start or “Check Engine” light is illuminated. Check car fuel system regularly ensures the best performance of your car with the lowest emissions;
8). For Transmission System:
If your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
9). For Wiper System:
If you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
10). For Light System:
If you see rapid signal blinking or dimming lights. And many more...
2. Supports CAN FD and DoIP protocols (For 2020+ GM nd Other New Cars!)
1.) CAN FD
It is the only product in this price range that is compatible with CAN-FD protocol and supports the latest GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
Supports Chevrolet Onix 2020 - 2021 year
Supports Chevrolet Tracker 2020 year
Supports Chevrolet Suburban 2021 year
Supports Chevrolet Tahoe 2021 year
Supports Buick
Supports Cadillac Escalade 2021 year
Supports Cadillac Escalade 2021 year
Supports GMC Yukon 2021 year
Supports GMC Yukon XL 2021 year
Supports Holden
Supports Daewoo
Supports Alpheon
Supports Ravon
Supports Pontiac
Supports Saturn
Supports Hummer
2). DoIP
With diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes Launch CRP919X BT save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F & G chassis), Volvo (2018+), Land Rover & Jaguar (2017+).
3. Bi-Directional Control (Active Test)
Actuate solenoids and actuators for active testing, send commands to systems / components to test their working status, without using the vehicle controls.
4. ECU Coding
The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc.
Note: ECU coding are NOT universal for all vehicles models.
5. 31+ Repair & Maintenance Reset Services
1). ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2). TPMS Reset
When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
3). Oil Lamp Reset
Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.
4). Electronic Throttle Sensor Reset
To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
5).Injector Coding
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
6). SAS Reset
It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.
7). Brake-Pad Reset
To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
8). Gear Learning
Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
9). IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
10). Battery Matching
Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.
11). DPF Regeneration
It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.
12). EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.
13). Suspension Matching
When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.
14). NOx Sensor Reset
If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
15). Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16). Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory.
17). Stop-Start Reset
This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)
18). AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
19). AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.
20). AFS Headlamp Reset
This function enables you to initialize the adaptive headlamp system.
21). A/F Reset
This function is applied to set or learn air/fuel rate parameters.
22). Gearbox Reset
This function enables you to complete the gearbox self-learning to improve gear shifting quality
23). Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
24). Transport Reset
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.
25). Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
26). High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status information detection.
27). Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.
28). Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
29). Language Change
This function is used to change system language of vehicle center console.note:you need to have language pack to do language change
30). Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.
31). Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.
Note:
Available maintenance functions vary depending on the vehicle make, year, and model.
6. Share Report via Wi-Fi & Print Report
Rather than taking the additional hassle, with this Launch scanner, you would easily be able to share the diagnostics report to your clients or technicians via Wi-Fi (Email address) . They would take a look at the full, clear, and accurate diagnostic report, and then understand what would need to be done. No more Googling unreliable fixes that would waste your energy.
Supports Over 115 Car Brands and 10000+ Models:
America
BUICK, CADILLAC, CHEVROLET, CHRYSLER, DODGE, FIAT(BRAZIL), FORD, GM, JEEP, LINCOLI, GM(BRAZIL)
Europe
ABARTH, ALFA ROMEO, AUDI, BENTLEY, BMW, BUGATTI, CITROEN, DACIA, IZH, EURO FORD, FERRARI, FIAT, GAZ, OPEL(SOUTH AFRICA), IVECO, JAGUAR, LAMBORGHINI, LANCIA, LANDROVE, MASERATI, MAYBACH, MERCEDES, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, ROLLSROYCE, ROVER, SAAB, SEAT, SKODA, SMART, SPRINTER, VAUXHALL, VAZ, VOLVO, VW, ASTONMARTIN, VW_CV
Asia
CURA, DAEWOO, DAIHATSU, HOLDEN(AUSTRALIA), HONDA, HYUNDAI, INFINITI, ISUZU, KIA, LEXUS, LUXGEN, MAHINDRA(INDIAN), MARUTI(INDIAN), MAZDA, MITSUBISHI, NISSAN, GTR(NISSAN), PERODUA, SAMSUNG, SSANGYONG, SUBARU, SUZUKI, TATA(INDIAN, TLISUZU, TOYOTA
Optional Compatible Accessories:
1. Launch X431 VSP600 Video Scope
VSP- 600 Video Scope can check unseen parts of the engine, fuel tank, braking system, etc.; Helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment. It works with LAUNCH X-431 scanners or any Android device and streams live video on it. Technicians can view, record and save images and videos
2. Launch X431 BST360 Bluetooth Battery Tester
Launch X431 BST360 can view the health status of the vehicle battery and electrical system. Allow you to fix battery detection faster and easier.
3. Launch X431 TSGUN TPMS Tire Pressure Detector
It works with X-431 diagnostic tools to expand new functions and generate new revenues for X-431 users, activate all 315MHz/433MHz sensors, relearn & program LAUNCH sensors.
Specifications:
Operating System: Android 10.0
Processor: 2.0GHz quad core
Memory: 4GB
Storage: 64GB
Display: 7-inch LCD screen with 1024*600 resolution
Camera: 8 megapixel rear camera
WiFi: 2.4GHz
Battery: 6300mAh
Packing List:
Launch CRP 919X BT Scanner
DBScar VII VCI
Main Diagnostic Cable
OBD2 Diagnostic Connector
USB Type-C Cable
DC Power Adapter
Power Plug EU
Power Plug US
Power Plug UK
Quick Start Guide
Password Envelope
Packing List
Plastic Toolbox
Packing Box
 |
USD
.jpg)
