|
Name: Launch X431 PRO3 V+ Elite
Description:
Launch X431 PRO3 V+Elite is upgraded version of Launch X431 V+ 5.0. Launch X-431 PRO3 V+ Elite comes with Launch SmartLink V2.0 supports CAN FD & DoIP, supports ECU Online Coding, Topology Mapping...
Versions:
EU Version: for EU/UK markets
Global Version: for global markets except EU/UK
Software Update: 2 years free update online
Supported Languages:
English, French, German, Spanish, Portuguese, Russian, Dutch, Swedish, Polish, Korean, Japanese, Traditional Chinese
Advantages:
1. Upgraded SmartLink C 2.0 VCI
2. J2534 Programming is done when no band end Programming occurs, the coding data doesn't exist, or other module problems happens.
3. Supports CAN 2.0 / CAN FD / DoIP New Protocols: Cover for GM, for BMW E/F/G Chassis, for Jaguar, for Land Rover models, eliminate cost for additional adapter.
4. Intuitive color-coded Topology Map displays structures between vehicle modules for easier analysis, serving as reference for practical repair.
5. VAG Guided Functions
6. AutoAuth Service: Access 2018+ FCA SGW Module.
7. Through Pin Detection, technicians can access the voltage of OBD-II diagnostic socket pins and supported protocols, so as to accurately determine the status of OBD-II diagnostic interface.
8. 60+ Reset Functions to fix issues of injector, EPB, BMS, power balance, etc., serving for more vehicles around the world.
9. D-PDU allows to access real-time ECU data, work efficiency in diagnosing and fixing faults; makes different devices compatible with each other.
10. ECU Coding and 3000+ Active Tests
11. OE-Level All System Scan: More accurate diagnostics, and quicker car solution. All available on worldwide cars, stronger vehicle support>others.
12. One-Click Online Update: You gain access to the latest functions and software versions, ensuring you never waste a moment of your time.
13. Upgraded Hardware: 4G RAM + 64G storage based on Android 10.0 for more stable system running and wider compatibility, 10-inch sharp touchscreen for clear display even in sunlight, 6300mAh battery for higher power and expanded usage time, replaces OBD-16 with DB15 for stronger connection, etc.
Supported Expanded Modules:
1. ADAS Calibration Toolkit (ADAS Moblie / ADAS PRO): Calibrate a wide range of camera-based & radar-based driver assistance systems
2. VSP-600 VideoScope: Inspect areas inaccessible;
3. X431 TSGUN/i-TPMS: Full-capacity TPMS functions;
4. BST-360 Bluetooth Battery Tester: Test battery in-vehicle or out-of-vehicle;
5. X-PROG & X-PROG3 Immobilizer: Key programming & ECU TCU cloning.
6. WiFi printer: Print out diagnostic data and information
7. Heavy Duty Package: Launch SmartLink C V2.0 Add-on Module is an essential truck module which can turn your X431 scan tools into full function heavy-duty truck diagnostic tools, working on both heavy-duty (Class 4 through 8) and medium-duty trucks (Such as heavy trucks, city buses, bulldozers, excavators, etc.)
8. IMMO Software Pack: Advanced key programming & IMMO service. (Function is available with the new Launch SmartLink, must use with X431 XPROG-3 GIII Key Matching will expand the anti-theft function just like Launch X431 IMMO Plus.)
9). Launch X431 key programmer: generate/copy remote transponder functions. (Direct connection, don't need OTG converter).
10. O2-2 Scopebox: Detects high level faults on various electrical components, such as sensors, actuators and circuits.
11. S2-2 Sensorbox: Diagnosing/testing/simulating most vehicle sensor faults.
12. EV Diagnostic Kit: For new new energy battery vehicles.
13. EM101N Multimeter
Functions:
1. All System Diagnosis
Launch X431 PRO3 V+ Elite reigns supreme as the universal scan tool, adept at diagnosing all systems on 99% of vehicles traversing the roads. Experience diagnostics elevated to OE levels, enabling you to decode even the most intricate complexities that lie beneath the surface.
1). PCM(Drive System): Unveil the secrets of the engine, transmission, transfer case, electrical machine electronics, gear, and more.
2). Chassis System: Explore realms like accumulator management electronics, steering, integrated chassis management, tyre pressure control, active cruise control, braking system, suspension, TPMS, and more.
3). BCM (Body System): Decode the language of SR-S airbag, camera, audio radio, gateway, cluster dashboard, rain sensors, charging interface module, parking assistance, power control unit, touch box, lights, battery charging system, head-up display, wipe control system, roof, seat & door motor systems, immobilizer, AB-S ESP system, air conditioning, electric windows, and more.
4). Electrical System: Navigate the complexities of centralized control, chassis integrated control and safety systems, and the intelligent body electronic system, as well as communication and information/entertainment systems.
2. ECU Coding
Launch X431 PRO3 V+ Elite scanner is a bi-directional scan tool that can control various sub-systems or components to perform active tests (also known as component tests) like turn fuel pump on/off, cycling the A/C Clutch on/off, EVAP test, windows, doors, sunroofs, wipers and more, to determine the integrity, monitor the operations to check whether they are functioning properly or not and quickly locate the fault causes.
1). Online/Offline Coding:
Launch X431 PRO3 V+ Elite diagnostic scan tool has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed. Optimally code your car by changing some settings to fit your needs, such as setting alarms, doors locking, etc.
2). Reflash Hidden:
Access the ECU to make full use of the hidden features or disable the car’s annoying functions, like activating the auto side mirrors folding function, disabling the automatic engine start or stop function, etc. Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car’s performance.
3). Matching:
Reprogramming the adaptive data, matching and synchronizing the components for certain components after repairs or replaces the modules.
Note:
ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.
ECU Coding Compatibility:
Online Coding: BMW, VW, Audi, Skoda, SEAT, Porsche, etc.
Offline Programming (Variant Coding): Benz, Ford, Mazda, Vauxhall, Opel, etc.
Flash Hidden Functions: Benz, BMW, VW, Audi, Skoda, Seat, Porsche, Jeep, Dodge, Chrysler, Toyota, Honda, etc.
Power Balance Test:
Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. It's one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.
PMI(Programmable Module Installation):
Launch X431 PRO3 V+ Elite Support PMI function, Compatible with Ford /Lincoin/ Mazda etc. This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.
3. J2534 Programming
Through J2534, you can easily perform ECU programming for much more models (including Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Benz, etc.).
1). Program Blank ECU:
Match OE configurations with the software & settings after ECU rep1acement.
2). Refresh the ECU:
Write new data and information into the used ECU to ensure proper running.
3). Restore ECU Information:
Restore the original data if needed.
4). Upgrade ECU Software:
Upgrade the software to the latest version.
Why is ECU coding so important?
1). To produce more payback & profit; keep more jobs in house, gain more control over the quality of repair, and increase shop capabilities.
2). To recode the adaptive data for new ECU modules setup.
3). To fix complex ECU-controlled issues.
4). To customize and advanced settings.
Worry about loss of ECU data?
1). Cloud-Based Data: Upload the coding data to Launch cloud rather than just storing in hard disk. You will still access to the data even if the hard disk goes wrong.
2). Data Backup/Restore: Create a backup of ECU data stored in the control modules, and restore the original data if needed.
Note:
This feature can not work on all vehicles. Compatibility depends on the model and year of your car model.
4. 60+ Reset Service
EPB Reset(Electronic Parking Brake Reset):
After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
Oil Lamp Reset:
Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
SAS Reset(Steering Angle Calibration Reset):
Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
BMS Reset(Battery Register / Battery Maintenance):
Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
ABS Brake Bleeding:
When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
ETS Reset (Electronic Throttle Position Learn/Throttle Matching):
After the engine has been working for a long time, there will be serious carbon deposits in the throttle, which will affect the intake. After cleaning or replacing the throttle, the throttle opening cannot match the original ECU. This is to allow the ECU to enter Throttle learning status, let the ECU re-match the throttle opening.
TPMS Reset (Tire Pressure Monitor System Reset):
When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's ECU, reset tire pressure and turn off the tire pressure MIL.
GEAR Reset (Gear Learning):
The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
Injector Reset (Injector Coding):
The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
IMMO Reset (Immobilizer Reset):
In order to prevent the car from being used by illegal keys, the car can be opened and used normally only after the remote key is recognized and authorized by the immobilizer control system on the car through this function.
SUS Reset (Suspension Reset):
This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
AFS Reset (Adaptive Frontlighting System):
It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
GPF Regeneration(Depending on the specific car models, not for all cars.)
Head Light Fitting,
Seat Matching/Calibration
Door and Window Initialization Study/Calibration
Sunroof Initialization
Air Suspension Matching
Gearbox Matching
Injector Calibration
Multimedia Video Reset
Cluster Reset
Tire Change Reset
Key Programming(Need to purchase and match with Launch X431 PROG3)
Coolant Bleed
NOx Sensor Reset
Eng/Start Reset
Transport Mode
AdBlue Reset
A/F
A/C Relearn
Intelligent Cruise Control
Engine Power Balance Monitoring
Motor Angle Calibration
High Voltage Battery Diagnostics
...
Access 100+ Special Functions: Brand>>System>>Module>>Special Functions
Get More Services from 1. Diagnose>>2. Car Model>>3. System>>4. Special Function
5. Active Test (Bi-Directional Control):
Launch X-431 PRO3 V+ Elite car scanner diagnostic tool features full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test,turn on interior & exterior lights, sound horn, test door lock actuators and such.
6. New Topology Mapping
1). Color-coded system structure faithfully reflects true relationships between all vehicle modules, serving as a valuable reference for practical repair, saving time and money for a dealership visit.
2). Multi-system parallel communication allows for comprehensive analysis of all systems within the car in seconds, providing detailed diagrams of all components.
3). Graphic display of different states of each system helps quickly and accurately locate the fault of the car, greatly improving work efficiency.
7. Guided Function for VAG Vehicles
Launch X431 PRO3 V+ Elite car scan tool provides step-by-step repair guidance for technicians.the function of guiding the use of the product to prevent the car setting caused by wrong operation. Compatible with VAG series vehicles(V-olkswagen / Audi / Skoda / Seat etc.)
8. AutoAuth for FCA/ SGW
Use the latest software update function AutoAuth to provide OBD-II diagnosis, active testing, calibration, etc. for modern FCA/SGW vehicles, making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later (NOTE: FCA America can be registered and used.)
9. 12-In-1 Graphic Live Data
This car scanner diagnostic for all cars features a mix of visual data that makes it easy to understand what's going on inside your vehicle.
Each detail is presented in real-life data and live graphs of all systems including engine speed, temperature, mass air flow and such, 12-in-1, all in one screen! Imagine how fast it could be to evaluate your vehicle's health at a glance.
10. Smart AutoVIN & AutoScan
Automatically skip the manual input of vehicle’s VIN code and head you towards the matched diagnostics on the system selected.
11. Pre & Post Scan
Pre & Post Scan documents the pre-repair and post-repair condition, providing a clear comparison to help mechanics fix problems. This feature also confirms that all pre-repair faults have been resolved and detects if new error codes generated during the repair.
12. Auto-Generated Diagnostic Report
This diagnostic tool can automatically generate a diagnostic report when your diagnostic work is successfully finished. The reports are saved in PDF format to maintain vehicle health logs.
As the diagnostic scanner connects to the Wi-Fi network, the reports can be printed via a printer or directly e-mail to others, to find solutions with people who are encountering the same issue or are familiar with similar vehicle repair.
Offer us the diagnostic reports when you are facing a complex car issues. We need this report for better data analysis.
13. Remote Diagnosis
In the event you can't solve a problem, Launch X431 PRO3 V+ Elite integrates real-time online remote assistance.
Some other automotive scanners may offer similar features, but through the unstable and expensive Team Viewer. While Launch X431 scanner raises the standards again allowing you to ask for remote mechanic assistance via web browser, or one-for-one between two X431 users.
It has realized the reality that a mechanic can diagnose an abnormal vehicle which is even thousands of miles away, yet faster, simpler, and more stable.
14. Massive Repair Materials & Tips
Vast database of repair and diagnostic tips in this bi-directional scan tool. Like:
1). OBD Fault Code Library:
Explains the DTC meaning; no need to Google an unknown DTC.
2). Coverage List:
Shows the supported functions and car systems after selecting specific vehicle make, model, and year.
3). Video:
Instructional videos for you to stay informed of changing technologies and refine service skills.
4). Learning Materials:
Here you can check the repair processes relevant to specific vehicles and faults in real world. It's based on cases from millions of successful repairs.
15. View History
Once a vehicle diagnosis is performed, you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch..
Cover 200+ Makes and 99% Vehicles Models:
Launch X431 PRO3 V+ Elite supports new and old models of 200+ global car brands in America, Asia, Europe, etc., including new energy vehicles.
1). 12V/24V Compatible: Works on 12V/24V fuel vehicles. Supports both passenger cars and commercial cars.
2). AutoAuth for FCA SGW: Serves FCA SGW-equipped cars, including 2018+ Fiat, Chrysler, Alfa Romeo, Dodge, etc.
3). J2534/D-PDU Protocols: Supports Toyota, Honda, Volvo, Subaru, Land Rover/Jaguar, Ford, GM, BMW, etc., no need extra adapter.
4). CAN FD / CAN 2.0 / DoIP: Covers Land Rover/Jaguar (2017+), BMW F/G chassis, GM (2019+), Volvo (2018+), etc.
Specifications:
Processor: 2.0GHz 4-core
Operating System: Android 10.0
Display: 10.1 inche touchscreen with 1280*800 resolution
RAM: 4GB
Storage: 64GB
Camera: 8 million pixels rear
WiFi: 2.4GHz/5GHz (dual-band)
Interface: USB Type A / USB Type-C
Battery: 47.880Wh (7.6V / 6300mAH)
Working Temperature: 0~50℃
Size: 274*190.5*40.5mm
Packing List:
Launch X431 PRO3 V+ Elite Tablet Scanner
Launch SmartLink C V2.0
Main Cable
OBD2 Adapter
USB Type-C Cable
USB Type-B Cable
Ethernet Cable
Power Adapter
Power Plug EU
Power Plug US
Power Plug UK
User Manual
Quick Start Guide
Packing List
Plastic Toolbox
Packing Box
|
EUR
.jpg)
